WINE AND DINE IN GLITZ & GLAM
faceted gold crimp beads (15 pieces)
iris blue faceted tube beads (45 pieces)
iris bronze faceted tube beads (45 pieces)
tear drop-shaped swarovski crystal (1)
1mm gauriya leather cord (40 cm)
size-d olive nymo thread (2m)
2.125inch big eye needle (1)
Thread the gauriya leather cord through the tear drop-shaped swarovski crystal. The crystal should be in the middle of the leather cord.
Fold the 2 metre long nymo thread into equal halves. Thread through the big eye needle with the U-shaped end of the nymo thread. Fasten the nymo thread loop about 10mm away from the crystals.
Using the figure-8 method, thread on a few crimp beads before securing the wine glass charm to the clipboard. This way, it will be easier as you'll have more working length after you secure the wine glass charm to the clipboard.
Continue threading the remaining crimp beads until you have finished all 15 pieces.
Thread all 45 pieces of faceted tube beads (iris blue or iris bronze).
End the nymo thread with a square knot.
Tie 2 overhand knots, 1 beside the last tube bead, another about 1.5~2cm away from the first overhand knot.
"And there you have it, your very own wine glass charm!"
Check out our DIY Cement Coasters here!